____________________________________________________________________________
- 25 -
3.3 Static Output Function
FTP9000 series power supply provides auto ranging wide range output within its rated power. The output range is
0 ~ 102% rated output of voltage, current and power.
Press
,
or
, the power supply enters static output function, the screen displays
information as below:
80V/510A/15000W
V.I.P
0.0000
V
0.0000
A
0.000
w
V_Set
0.000
V
I_Set
0.000
A
P_Set
0.000
W
Off
Figure 3-1 Static Output View
Setting output voltage:
1. Press
, power supply enters static output mode, the cursor for voltage set blinks, also you can rotate
the knob to highlight the voltage setting and press
to edit voltage,
2. Use
to set the value and press
to confirm the voltage setting or rotate the
knob to set the value.
When using the “Rotary” knob
for setting, use
to move the cursor to the individual
digit, and then rotate the rotary knob to increase or decrease the value.
When power supply is reset to factory setting, the default voltage set is 0V.
Setting output current or output power:
Press
or
and follow the similar steps.
When power supply is reset to factory setting, the default set current is maximum output current, default set
power is maximum output power.
