Chapter 2 - page 8
MCO-TCO work mode
2.4 JOGGING THE AXES
The axes of the machine can be moved in the following ways:
-
continuous jog
-
incremental jog
-
jogging with an electronic handwheel
-
jogging to a programmed position
2.4.1
JOGGING TO A PROGRAMMED POSITION
The movement is carried out one axis at a time. With the feedrate «F» and at the selected %.
Position
Position
2.4.2 INCREMENTAL JOG
Place the left-hand switch in one of the positions
Incremental movement must be done axis to axis. To do this press the JOG key for
the direction of the axis to be moved.
Each time a key is pressed, the corresponding axis moves the amount set by the
switch. This movement effects the «F» feedrate selected.
Position of the switch
Movement per turn
1
0.001 mm or
0.0001 inches
10
0.010 mm or
0.0010 inches
100
0.100 mm or
0.0100 inches
1000
1.000 mm or
0.1000 inches
10000
10.000 mm or
1.0000 inches
