Chapter 5 - page 7
MCO-TCO work mode
Graphic parameters
Simulation speed. In the top right-hand of the screen select the percentage of the simulation
speed to be applied.
To select the percentage use the
keys and for the CNC to assume said value,
press
Colors of the path. This only applies in line graphics (not solid). It enables selection of colors
to represent rapid traverse, the path with no compensation and the path with compensation
.
From the right-hand side of the screen, use the
keys to select the type of path and
the
keys to select the color required for application.
For the CNC to assume said values press
Colors of the solid. This only applies in solid graphics (not in line graphics). It enables selection
of colors to represent the cutter, the part, the axes and the clamps.
At the top right-hand side of the screen use keys
to select the type of path and
the keys
to select the color to be applied.
For the CNC to assume said values press
Erase screen
When this option is selected the CNC erases the screen and displays the axes or the
unmachined part.
The screen cannot be erased during simulation of the part. In this case stop simulation by
pressing the
key
After selecting the types of graphics, the display area, the graphic parameters, etc. press
to
start the graphic simulation.
During the graphic simulation, the CNC takes into account the simulation speed and the position of
the right Manual Feedrate Override switch (0%-120% FEED).
When selecting a new simulation speed, the CNC applies a 100% of it regardless of the position
of the switch.
Once the switch is moved, the CNC starts applying the selected %.
To interrupt the simulation, press
To quit the simulation mode, press
or
