Chapter 5 - page 3
MCO-TCO work mode
5.2 SIMULATING OR EXECUTING A PART-PROGRAM
Whenever you wish to simulate or execute a part-program do the following:
* Press
to access the list of part-programs stored.
* Select the program to be simulated or executed from the left-hand column.
To simulate the part-program press
and to execute it press
5.2.1 SIMULATING OR EXECUTING A SECTION OF A PART-PROGRAM
To simulate or execute a part program, proceed as follows:
* Press
to access the list of the stored part-programs.
* Select the program in the left column and the first operation to be executed or simulated in the
right column.
Press
to simulate the part program, and
to execute it.
Warning
Whenever a section of the part-program is executed, the CNC does not execute the
initial subroutine 9998 associated with all part-programs.
5.3 SIMULATING OR EXECUTING A STORED OPERATION
To simulate or execute an operation which is stored as part of a part-program do the following:
* Press
to access the list of part-programs stored.
* Select the program which contains it from the left-hand column and the operation required
to be simulated or executed from the right-hand column.
* Press
To simulate the operation press
and to execute it press
