Chapter 2 - page 2
MCO-TCO work mode
2.1 INTRODUCTION
The standard screen for the CO operating mode may be entirely customized (see "screen customizing"
in the installation manual).
The one supplied by Fagor contains the following information:
1.- Clock
2.- This window can display the following data:
SBK
when the Single Block execution mode is selected.
DNC
when the DNC mode is activated.
P.....
number of the program selected.
Message
«In Position» - «Execution» - «Interrupted» - «RESET»
PLC messages
3.- The CNC messages are shown in this window.
4.- This screen may be entirely customized (see "screen customizing" in the installation manual).
The one supplied by Fagor can display the following data:
* The coordinates of the axes. The
?
symbol indicates that the axis is working in diameters.
* When defining the text 33 of program 999997, the screen will show the axes coordinates
referred to machine reference zero (home) in small characters.
* The real spindle rpm "S".
* In a box, the coordinates of the auxiliary axes that are defined.
5.- This window may be customized entirely (see "Screen customizing" in the installation manual).
The one supplied by Fagor shows the feedrate of the «F» axes that has been selected and the %
of F which is being applied are shown.
When Feed-hold is active, the feedrate value changes colors.
On the other hand, depending on the position occupied by the left switch, it can show the
following information:
