（
1
）
Starting Auto Stop
a)While the unit is controlled, the operation
gets started when pressing
［
Set
］key.
b)While the unit is under suspension, press
[Run/Stop] key while selecting Auto Stop.
Then, Auto Stop operation gets started.
※
If no operation gets started within a minute
after selecting Auto Stop, the unit starts
performing constant operation again.
In such a case, select Auto Stop again by
[Mode] key.
※
1 Display before starting Timer Count
（
Display before the temperature reaches at
the setting value
）
・
Indicator displays measured temperature.
・「
Temperature display lamp
（℃）」
blinks.
・
While the heater is turned on,
「
Heater lamp
（
Heating
）」
lights up.
・「
Refrigeration unit lamp
（
Refrigerator
）
」
lights up when the refrigeration unit is running.
※
2 Display after starting timer count
（
Display after the temperature reaches at
the setting value
）
・Indicator displays measured temperature.
・「
Time display lamp
（
h.m
）」
blinks.
・「
Temperature display lamp
（℃）」
lights up.
・
While the heater is turned on,
「
Heater lamp
（
Heating
）」
lights up.
・「
Refrigeration unit lamp
（
Refrigerator
）
」
lights up when the refrigeration unit is running.
(2) Timer
a)When checking the remaining time of timer, press
[Mode] key when the temperature reaches at the
setting value and time display lamp (h.m) blinks
to display measured temperature.
・「
Auto Stop Lamp
」
blinks.
・｢
Temperature display lamp
（
h.m
）」
lights up.
※
If not key operation is done for approx. 10 sec.,
the display returns to measured temperature.
b) Displayed time of the timer will be subtracted as
the timer works.
c) Pressing [Mode] key for longer than 5 sec. can
stop counting the time on the half way.
・
Operation changes from Auto Stop to Constant
number operation.
(3) Stopping Auto Stop Operation
Auto Stop operation stops controlling when the
timer stops counting the time.
After control, indicator displays constant number
operation.
・「
Auto Stop Lamp
」
turns off a light.
・「
Time display lamp
（
h.m
）」
turns off a
light.
・「
Temperature display lamp
（℃）」
lights up.
※
If you'd like to finish controlling the unit before
completing counting time, press [Run / Stop] key.
※
When finishing operations of the unit, stop running the
operation and turn off the power switch. Turning the
power switch off without stopping operations can occur
power failure alarm next time.
※
If you do not use the unit for a long period, turn off the
power switch and residual current device and disconnect
the power lug from the outlet.
（
1
）
Starting Auto Stop
Operation
※
1 Before timer starts
counting
※
Not required while
the unit is controlled.
※2 Timer starts
counting
(
2)Checking timer
count
※
No key operation
for 10 sec.
-33-
(3) Stopping Auto Stop
2. Starting and stopping Auto Stop
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
5.00
●
●
○
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
23.5
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
37.0
●
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
4.32
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
37.0
○
○
○
※
If you press [Mode] key to change the display
while the unit is controlled, the display will be
changed after approx.10 sec.
●
○
