※
After setting the time for constant number
operation, set the timer mode and
timer.
(1) Setting Auto Stop / Auto Start
Range of setting time for timer is shared with
all the timer mode except 24-hour cycle
operation (24 Hour Pro.). Setting time can be
changed in any timer mode even during control
or under suspension. When performing 1-step
operation (1 Step), step temperature is required to
be set besides time setting.
1) Press
［
Mode
］
key.
Indicator changes to display measured time and
timer mode can be selected.
a) In constant number operation (during control
or under suspension),
｢
Auto Stop Lamp
（
Auto
Stop
）」
lights up.
b) While the unit is controlled in Timer Mode,
"Ongoing mode's lamp" blinks.
・「
Time display lamp
（
h.m
）」
lights up.
・「
Temperature display lamp
（℃）」
turns off a light.
2) Each time you press
［
Mode
］
key, timer mode
changes. Select your desired mode.
※
Timer mode changes in order as shown below.
↓
Auto Stop Lamp
（
Auto Stop
）
↓
Auto Start lamp
（
Auto Start
）
↓
1-step operation lamp（1Step）
↓
24h cycle operation lamp(24Hour Pro.)
↓
Temperature display
(Lamps of all the modes turn off lights)
3) Press
［
Set
］
key. Indicator changes to display time
setting (blinking) and time can be set.
・「
Set key lamp
（
SV
）」
lights up.
※
Setting time is the value that was set previous time.
Factory default value is 0he00min.
［
0.00
］
.
4)
Press
［▲
] or
［▼］
key to input the time to input the
time
※
Each time you press
［▲］
or
［▼］
key, the value
changes by a minute. Holding down the key for
longer than a second can change the value by 10
minutes, and holding down the key for longer than
8 sec, the value changes by 10 hrs.
5) Press
［
Set
］
key.
a) While the unit is controlled, displayed setting time
(blinking) is determined and selected timer mode
control gets started.
b) While the unit is under suspension, displayed
setting temperature (blinking) is determined.
・
Indicator changes to display measured temperature.
・「
Set key lamp
（
SV
）」
turns off a light.
※
If no key operation is done for longer than a minute
while setting timer, the indicator changes to display
measured temperature. In such a case, please repeat
the same procedure from 1) in a completely opposite
manner.
5-2-4.
Setting, running and stopping Timer Mode
1),2) Select the mode after
entering into Timer Mode
3)Setting time
4)Changing time setting
5)Determining setting
time
-30-
For more details about the
operation of Auto Stop,
please refer to P.33.
※
Indicator displays measured
temperature.
1. Setting Timer Mode
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
○
○
23.5
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
○
0.00
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
0.00
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
5.00
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
5.00
●
●
○
For more details about the
operation of Auto Start,
please refer to P.34.
※
Above picture is in the
status of under suspension.
※
Indicator displays
「
24SP
」
while the unit
is under suspension.
While the unit is
controlled, "Setting
value" is displayed.
