- 25 -
External water-supply tank
Socket
Nut for socket
Hose (supplied)
Replacement of hose of water supplying hose set
Put the hose into the nut for socket,
connect it to the socket, and tighten the nut.
Connect the L-shaped socket to the
another end of hose, and fix it with a hose
band.
Socket
Socket
Nipple
L-shaped socket
Hose set
Be careful not to twist
it when connecting to
the hose set.
Open
Close
Cock
Silicone tubing
Squash to remove air.
L-shaped socket
Plug for
supplying water
Drain nozzle
Connect the socket of hose set to the nipple
of external water-supply tank.
Just push the socket to attach tightly.
To disconnect them, hold either one of the
sockets and slide it
in a direction opposite to
the nipple.
Open the stopcock of the external water-
supply tank, and squash the silicone tubing
several times to remove included air
completely. If you remove the air
successfully, air bubbles are found in the
tank.
If air bubbles are remained in the tubing,
water cannot be supplied.
Attach the socket of hose set to the water-
supply plug. Just push the socket to attach
tightly (Push it until you hear the click.)
To disconnect, push the black socket part
backward.
If you use a cartridge type water purifier
(ERN) in place of the external water supply
tank, replace the hose of hose set with the
supplied another hose for the cartridge
purifier. Make sure that no leakage is found
between the faucet and connecting port of
the unit.
When using a cartridge water purifier, attach
a pressure regulator to keep the supplying
pressure 0.1MPa or lower.
(3)
(4)
(5)
*
*
