No.
Name
Functions
⑰
Time mode display lamp
The lamp goes on to display the timer measuring time mode:
Mode1
：
ON for display of the vacuum pump operation time
Mode2
：
On to display the time of stopwatch function
⑱
Timer mode selector key
Key to select the timer display time (Mode1
・
2)
To set the power failure time, press the key. The value increased by one
each time the key is pressed. The value increases continuously when the
key is kept pressing.
⑲
Set key
Used to change the input of power failure set value (default: 5 minutes) for
the power recovery function.
If alarm is issued, this key can cancel the alarm lamp and display, and stop
the buzzer.
⑳
Set lamp
The lamp goes ON when the set key is pressed ON.
※
The lamp does not go ON when the alarm is canceled.
㉑
Time reset key
Keep pressing this switch for five seconds or more. The timer display time
of the timer mode can be reset.
To set the power failure time, the value decreases by one each time the key
is pressed. The press value decreases continuously when the key is kept
pressing.
㉒
Timer key
Key to turn ON/OFF the stopwatch function the timer Mode2.
With this key ON, time count begins. With the key OFF (by pressing
continuously for about three seconds or more), time count stops.
※
When the Timer Mode1 is displayed with the key ON, the key OFF
causes change of the display automatically to Timer Mode2.
㉓
Timer lamp
With the timer key ON (during time count in the stopwatch function), the
lamp goes ON.
- 10 -
Содержание FDS-1000
Страница 2: ......
