Extron electronics TouchLink TLP 350CV, Руководство пользователя

Страница: 12 / 54

Installation
Overview
Follow all these steps to mount and install the TLP 350CV. Follow steps 3 and 4 to mount the
TLE 350:
1.
Before starting, download and install the latest versions of the following software:
GUI Configurator — for designing layouts for Extron TouchLink touchpanels.
Global Configurator — for setting up and configuring the control processor and
touchpanel.
See Configuration Software on page 25.
2. Obtain the following network information from your network administrator:
DHCP status (
On
or
Off
). If DHCP is off, you also require
IP address
Subnet mask
Gateway
User name
— this can be either admin or user .
Password — by default this is
extron
(for either
admin
or
user
).
MAC address — make a note of the touchpanel MAC address.
3. Prepare to mount the CableCubby:
Make sure you are familiar with all the Included Parts (see page 7) and have all the
Tools Required for Installation (see page 7) for installing the cable cubby.
Plan where you are going to install the Cable Cubby and how you are going to cut the
hole.
Ensure the TLP 350CV is oriented correctly and that there is adequate room for cables
and cable retractors (optional).
Ensure you are using the correct cut-out template or dimensions (see Cut-out
Dimensions on page 8).
Ensure the installation complies with all necessary regulations.
4. Mount the Cable Cubby:
Cut the table surface (see Cutting the Table on page 8).
Run all cables to the unit (see Running Cables on page 10).
Install cable retractors (see Installing Cable Retractors (Optional) on page 10).
Install the power module (see Installing Power Modules (Optional) on page 11).
Put together and install the AAP assembly (see Preparing and Installing the AAP
Assemblies on page 12).
Mount the Cable Cubby (see Mounting the Enclosure on page 14).
TLP 350CV and TLE 350 • Installation Overview 4