manualshive.com logo in svg

Extron electronics TouchLink TLP 350CV, Руководство пользователя

Поделиться
Скачать
Extron electronics TouchLink TLP 350CV Скачать руководство пользователя страница 19

Installing Power Modules (Optional)

WARNING:
AVERTISSEMENT :

• 

Switch off all electrical power before connecting the AC conduit to a junction box, and 
keep power off until installation is complete.

• 

Débranchez toutes les sources d’alimentation électrique avant de connecter le 
conduit d’alimentation à un boîtier d’encastrement, et gardez l’alimentation éteinte 
jusqu’à ce que l’installation soit complète.

• 

If the power cable is installed next to the retractors, ensure the power cable cannot 
get tangled in the cable retractor mechanism.

• 

Si le câble d’alimentation est installé à côté des rétracteurs, assurez vous qu’il ne 
puisse pas s’emmêler dans le mécanisme du rétracteur de câbles.

ATTENTION:

• 

All electrical installation must be performed by qualified personnel in accordance with 
local and national building codes and electrical codes.

• 

Toute installation électrique, doit être effectuée par un personnel qualifié, 
conformément aux codes du bâtiment, aux codes incendie et sécurité, et aux codes 
électriques, locaux et nationaux.

NOTE:

  Different countries require different power adapters. See 

www.extron.com

 to select 

a power module that is suitable for your location.

The power module takes up two or three AAP spaces and may be installed before or after the 
AAP assembly is installed or, if desired, with AAPs on either side. 

Secure the power module

to the TLP 350CV frame

with #4-40 Phillips head

screws and star washers.

Figure 6. 

Installing a Power Module in the TLP 350CV

1. 

Secure the power module with at least two #4-40 Phillips head screws and star washers.

CAUTION:

 

Risk of electric shock:

 To ensure proper electrical grounding, use the 

provided grounding screws and star washers. 

ATTENTION :

 

Risque de choc électrique:

 Afin d’assurer une mise à la terre correcte, 

utilisez les fixations de mise à la terre et les rondelles en étoile fournies.

2. 

Run the cable or conduit to a convenient junction box. Extron recommends the circuit be 
attached to a junction box that is directly wired to the main circuit.

 

TLP 350CV and TLE 350 • Mounting

11

Содержание TouchLink TLP 350CV























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды