Extron electronics mediaport 200, Руководство пользователя

Страница: 121 / 164

MediaPort 200 • Remote Configuration and Control 114
Using the Command and Response Table
The Command and Response Table for SIS Commands on page 122 lists the
commands that the MediaPort scaling bridge recognizes as valid, the responses that are
returned to the host, a description of the command function or the results of executing the
command, and some examples of commands in ASCII.
NOTES:
• Unless otherwise stated, upper- and lowercase text can be used interchangeably in
the commands.
• When entering commands, do not use spaces unless denoted by the space
character symbol (
•
).
ASCII to HEX Conversion Table
•
Space
Figure 92. ASCII to Hexadecimal Character Conversion Table
Symbol Definitions
• = Space character
] = Carriage return with line feed
}
or
|
= Carriage return with no line feed
E
or W = Escape key
24
= Superscripts indicate the error code returned if the command is entered
incorrectly or with invalid parameters (see Error Responses on the
previous page).
NOTES:
• If the unit does not support or recognize an entered command, it does not respond
to the command in any way.
• In the following list, values for items followed by an asterisk (*) depend on the
resolution.
X@ = Video output:
1 = USB
2 = HDMI loop output
X#
= Input video format:
0 = No input signal detected
1 = DVI
2 = HDMI
X^ = Total lines (view only):*
Response is 4 digits, padded with zeros.
X& = Total pixels (view only):*
Response is 4 digits, padded with zeros.
figure 92.
ASCII to Hex Table