![Extron electronics mediaport 200 Скачать руководство пользователя страница 139](http://html1.mh-extra.com/html/extron-electronics/mediaport-200/mediaport-200_user-manual_2456403139.webp)
MediaPort 200 • Remote Configuration and Control
132
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
USB Name
Set USB name
E
D1*
X4(
UNAM
}
UnamD1*
X4(]
Sets the USB device name
of the MediaPort 200.
Set USB name to
factory default
E
D1*
•
UNAM
}
UnamD1*Extron
MediaPort 200
]
Resets the USB
device name of the
MediaPort 200.
View USB name
E
D1UNAM
}
X4(]
View the MediaPort 200
USB device name.
Reset
Reset to factory
defaults
24
E
ZXXX
}
Zpx
]
Reset all device settings to
factory default settings.
NOTE:
Receive timeouts are reset to defaults and port redirects are terminated. This reset excludes IP
settings such as IP address, subnet mask, gateway address, and the IP security-level table. It does not
remove the file system.
Erase all files from flash
memory
E
ZFFF
}
Zpf
]
Erase all files from flash
(user) memory.
NOTE:
This reset only removes files created in the user space, which includes those created by the backup
and restore functions, software configuration tools, image captures, user logo files, and other user-supplied
HTML files. Space used by firmware for internal operations such as saving non-volatile settings is not
removed.
Absolute reset, retaining
IP settings
E
ZY
}
Zpy
]
Reset all device settings to
factory defaults but retain
IP settings.
NOTE:
This reset removes all device settings, including the file system and passwords, but retains IP settings
such as IP address, subnet mask, gateway address, DHCP setting, and port mapping (Telnet, Web, and
direct access) in order to preserve communication with the device. This reset is recommended after a
firmware update.
Reboot system
24
E
1BOOT
}
Boot1
]
Reboot the unit.
Restart network
24
E
2BOOT
}
Boot2
]
Restart network
connections.
Absolute system reset
E
ZQQQ
}
Zpq
]
Reset all device settings
to the factory defaults,
retaining the firmware
version.
NOTE:
X4(
= USB name: up to 32 characters. Upper- and lowercase alphanumeric characters allowed,
including
_ \
and spaces.