Extron electronics mediaport 200, Руководство пользователя

Страница: 46 / 164

To update firmware via PCS :
1. Connect the MediaPort 200 to the host PC via the LAN port (see LAN Port on
page 21).
NOTE: Firmware updates are not possible via the front panel USB Config port.
2. From the PCS main window for MediaPort 200 (see figure 34 on page 37), select
the drop down triangle from the MediaPort 200 (see figure 37
1
below).
3. From the drop-down list, select
Update Firmware
(
2
) then
Update Firmware to this
Device
(
3
).
4. Click
Continue
.
Figure 37. Accessing Update Firmware
5. From the
Update Firmware to This Device
dialog box, click
Open Firmware File...
(see figure 38
4
below) and browse the disk for the firmware
file (default location is
Program Files (x86) > Extron > Firmware > MediaPort
).
6. Select
Open
.
7. Select
Update
(
5
) to update the firmware. The front panel LCD on the MediaPort 200
reads
Firmware Update Verify File
with a completion percentage. Followed by
Firmware Update Installing
with a completion percentage.
Figure 38. Update Firmware to This Device Dialog Box
The MediaPort front panel LCD reads
Firmware Update Complete
and reboots.
figure 37. Update Firmware to this Device
figure 38. Update Firmware to This Device Dialog Box
MediaPort 200 • Product Configuration Software (PCS) 39