Extron electronics mediaport 200, Руководство пользователя

Страница: 161 / 164

MediaPort 200 • Remote Configuration and Control 154
When the update is completed, the message window closes and the message
Firmware Upload Complete
appears near the top of the screen.
In the LCD window,
Extron MediaPort 200
is displayed while the unit is rebooting.
When the update is complete, the window shows the current firmware version
briefly and then returns to the default cycle.
5
Date/Time Settings — In this panel the unit date and time can be viewed or set.
Figure 101. Date/Time Settings Panel
•
To set the MediaPort date and time to match that of the
local computer, click
Sync to PC
(see figure 101
1
above). When the sync is completed, the message at
right appears.
•
To set the date and time manually, click
Set Manually
(see figure 101
2
above) to
open the
Date and Time Settings
dialog box.
•
To set the time, click the up and down arrows for each field to set the hours,
minutes, seconds, and AM or PM as desired.
•
To set the date, click the calendar icon to the right of the current date display. A
drop-down calendar allows selection of the day, month, and year (see
figure 102
below).
Figure 102. Date and Time Settings Dialog Box
6
Passwords — From this panel administrator and user passwords can be set or
removed.
NOTES:
•
An administrator password must be in place before a user password can be
assigned.
• Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
Setting a password
To assign a password:
1. In the
Passwords
panel, click
Set
. The
Passwords
dialog box opens.
2. If requested, enter a Login ID. The default is
Admin
.
figure 101.
Date/Time Settings Panel
figure 102.
Date and Time Settings Dialog Box