MediaPort 200 • Installation
27
Configuring Windows for MediaPort 200
NOTES:
•
In this guide, the following steps are performed with the MediaPort 200 in
Standalone audio mode and enumerated as
Speakerphone.
•
If the MediaPort 200 is in External DSP with AEC audio mode, the steps are the
same. However, Windows enumerates the MediaPort as
Echo Cancelling
Speakerphone
not
Speakerphone
as shown in the following steps.
1.
Connect a USB type A to B cable from the MediaPort 200 rear panel Type B USB port
to a Type A USB port of the computer running Windows 7. The appropriate drivers
install automatically. Figure 22
below shows the message that is displayed above the
Windows taskbar during driver installation.
Figure 22.
Driver Installation Message
When driver installation is complete, another message appears, showing that the drivers
are installed and the device is ready to use.
2.
Right-click on the speaker icon (see figure 23
1
below) on the Windows taskbar, and
select
Playback
Devices
(
2
) from the pop-up menu. The
Sound
dialog box opens,
displaying the
Playback
control panel.
Figure 23.
Speaker Icon and Menu on Windows Taskbar
NOTE:
To access
Playback devices
from the Windows Start menu:
1.
Select
Start
2.
Select
Control Panel
3.
Select
Sounds
figure 22.
Driver Installation Message
figure 23.
Speaker Icon and Menu on Windows
Taskbar
