Extricom EXSW800, Руководство пользователя

Страница: 43 / 58

The Extricom EXSW-800 WLAN Switch User Guide 37
Field Description
Community name Enter the community name.
Manager IP Enter the manager’s IP address.
At present, the following Traps are sent from the EXSW-800 to the station on which the SNMP manager
is enabled.
1. Configured and connected APs of channel [<channel number>] - This trap provides a summary of
all APs and their status. It is typically configured after a new/removed event
2. AP <ap number in hex base> has been connected - This trap is sent when a new AP is connected
to the switch
3. AP <ap number in hex base> has been disconnected - This trap is sent when a new AP is removed
from the switch
4. Reference Host is up – This trap is sent when the Reference host is up & active. Sent by the Main
switch
5. Reference Host is down - This trap is sent when the Reference host is down. Sent by the Main
Switch.
6. Standby Switch is up - This trap is sent when the Standby Switch is up & active
7. Standby Switch is down - This trap is sent when the Standby Switch is down
8. Inactive - Reference Host is down - This trap is sent when the Reference host is down, and hence
the Main switch becomes inactive.
9. Inactive Standby Switch - Main Switch is up - This trap is sent when the Main Switch becomes
active again and hence the Standby Switch becomes inactive (Switch over).
10. Main Switch is active again - This trap is sent when the Main Switch changes status from inactive
to active and regains the Main switch status.
11. Failure detected in Main Switch - Switching Over. - This trap is sent when the Main Switch is
about to go down and the Standby Switch is becoming Active.
Access Points the Configuration
The APs configuration for the Extricom WLAN architecture includes activating and providing PoE
to specific Access Points.
To access the Access Points configuration pages:
Click on the
Access Points
in the navigation tree. The APs configuration page appears (refer to
Figure 19 ).