Extricom EXSW800, Руководство пользователя

Страница: 40 / 58

34 Configuring the Extricom WLAN System
Field Description
Transmission Key Select the WEP/WEP104 key to be used for transmitting the data
from the Access Point.
WPA The WPA area is only enabled if the cipher selected in the Choose
Method field is WPA TKIP.
WPA-PSK If WPA with Pre-Shared key authentication is used, the
WPA-PSK field is enabled. In this case, select one of the
following input formats, and enter the corresponding key listed:
For ASCII, enter 8-63 characters.
For HEX, enter 64 digits.
WPA/Radius
Rekey Interval Enter the amount of time (in seconds) that elapses before the
Group Key is changed.
Radius Define the Radius server parameters if:
The cipher is WEP64/WEP128, and the 802.1x authentication
method is selected.
The cipher is TKIP, and the WPA (Radius) authentication
method is selected.
Server Address Enter the address of the Radius server.
Server Port Enter the Radius server port.
Server Password Enter the Radius server password.
4.
Click
Update
to save the configuration.
The new configuration only takes affect after rebooting the switch (refer to
Rebooting the Extricom Switch on page 19).
Advanced Configuration of the Extricom WLAN
Architecture
The advanced configuration for the Extricom WLAN architecture includes configuring the
following:
Redundancy parameters.
SNMP parameters.
In redundancy mode, two identical switches (H/W and configuration) are installed with the same
number of connected APs.