Extricom EXSW800, Руководство пользователя

Страница: 23 / 58

The Extricom EXSW-800 WLAN Switch User Guide 17
WLAN Configuration – used to configure WLAN parameters.
SSID & Security – used to configure SSID and security parameters, and password management.
Advanced Features – used to configure the switch Voice over WLAN, redundancy, and SNMP
parameters.
Access Points – used to configure different Access Points.
Utilities – used to view the switch configuration, restore switch default settings, upgrade the
switch firmware, set the time and date, and reboot the switch.
Password Management – used to alter system passwords
Summary – used to provide a summary of the configuration.
About – used to provide basic information about the Extricom WLAN system.
Alternatively, you can access the:
Summary page by clicking Summary in the menu bar.
About page by clicking About in the menu bar.
The work area displays the configuration pages selected in the navigation tree. Use this area to
configure the Extricom parameters.
After changing the values of the configuration parameters on a web configuration page, you must
click
Update
to save the new configuration. An update status message appears at the top and
bottom of the page informing you if the update was successful (refer to Figure 9). If the update was
not successful, a description of the problem is displayed (refer to Figure 10).
Figure 9. Successful Update Message Figure 10. Unsuccessful Update Message
The new configuration only takes effect after rebooting the switch (refer to
Rebooting the Extricom Switch on page 19).
Configuring the LAN Parameters
In the LAN Configuration page, you can configure the following:
The LAN IP address and network mask, as well as a backup address and mask.
The LAN interface VLAN tag IDs.
The default gateway.