32
Configuring the Extricom WLAN System
Field
Description
Disassociation
Timeout
Enter the amount of time (in seconds) a client can
remain inactive (no data sent to or from the client)
before automatically disconnecting from the
network.
DTIM Period
The period of time after which broadcast and
multicast packets are transmitted to mobile clients in
the Active Power Management mode.
Select the DTIM period for the selected SSID. This
is relevant for clients that want to utilize the power
management capability. The possible values are 1-5.
The default is 3.
The remaining parameters in the
SSID & Security
page are described in
Configuring
Security Definitions
on page 19).
3.
Click
Update
to save the configuration.
The new configuration only takes affect after rebooting the switch (refer to
Rebooting the Extricom Switch
on page 19).
Configuring Security Definitions
In the
SSID & Security
page (refer to
Figure 16
), you can configure the following security
definitions:
Type of encryption.
Type of authentication.
With some configurations, you can use encryption without authentication. However,
for a higher level of security, it is recommended to use both encryption and
authentication.
Security definitions are configured for each SSID individually.
To configure the security definitions:
1.
Click
SSID & Security
in the navigation tree. The
SSID & Security
page appears (refer to
Figure 16
).
2.
Select the SSID from the
Choose SSID
dropdown list for which you want to configure the
security definitions.
3.
Configure the security definitions for the selected SSID. Refer to
Table 9
for a description of the
Security parameters.
Содержание EXSW800
Страница 1: ...Version 2 0 THE EXTRICOM EXSW 800 WLAN SWITCH USER GUIDE ...
Страница 4: ......
Страница 20: ......
