Extreme Networks Summit WM3000 Series Скачать руководство пользователя страница 56

Страница: 56 / 513

Controller Information

Summit WM3000 Series Controller System Reference Guide

Read-only details about the port’s cabling connection also display within the

Edit

screen. This

information should be used to determine the configuration defined for this port.

Click the

button to commit the changes made to the port configurations.

Click

Cancel

to disregard any changes and revert back to the last saved configuration.

Name

Displays the read-only name assigned to the port.

Speed

Select the speed at which the port can receive and transmit the data.

Select from the following range:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
• Auto

Duplex

Modify the duplex status by selecting one of the following options:
• Half
• Full
• Auto

Channel Group

Optionally, set the

Channel Group

defined for the port. The controller

bundles individual Ethernet links (over the selected channel) into a single

logical link that provides bandwidth between the controller and another

controller or host. The port speed used is dependant on the Duplex value

selected (full, half or auto). If a segment within a channel fails, traffic

previously carried over the failed link is routed to the remaining segments

within the channel. A trap is sent upon a failure identifying the controller,

channel and failed link.

Description

Enter a brief description for the port. The description should reflect the

port’s intended function to differentiate it from others with similar

configurations.

Admin Status

Either Enable (activate) or Disable (shutdown) the admin status of the

port.

Medium

Displays the current (read-only) connection medium used by this port.

Use DHCP to obtain

IP address

automatically

Select to enable use of DHCP to assign IP address for this port.

IP Address

If 'Use DHCP to obtain IP address automatically' is not selected, then use

this field to enter the static IP address assigned to this port.

Subnet Mask

If 'Use DHCP to obtain IP address automatically' is not selected, then use

this field to enter the subnet mask for the IP address.

Содержание Summit WM3000 Series


































































































































































































































































































































































































































































































































Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды

Extreme Networks Summit WM3000 Series, Справочное руководство

Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды