Extreme Networks Summit WM3000 Series Скачать руководство пользователя страница 195

Страница: 195 / 513

Summit WM3000 Series Controller System Reference Guide

195

Select

Network

Access Point Radios

from the main menu tree.

Click the

WLAN Assignment

tab.

Select a radio from the table and click the

Edit

button.

The

Select Radio/BSS

field displays the WLANs associated to each of the BSSIDs used by the radios

within the radio table. Use

Select/Change Assigned WLANs

field to edit the WLAN assignment.

Use the

Primary WLAN

drop-down menu to select a Primary WLAN used for mapping enabled

WLANs.

Select any of the WLANs available within the table to assign them to the selected Primary WLAN.

Refer to the

Status

field for the current state of the requests made from applet. This field displays

error messages if something goes wrong in the transaction between the applet and the controller.

Click the

Apply

button to save the modified WLAN assignment.

Click

Close

to exit the screen without committing updates to the running configuration.

Содержание Summit WM3000 Series


































































































































































































































































































































































































































































































































Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды

Extreme Networks Summit WM3000 Series, Справочное руководство

Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды