Extreme Networks Summit WM3000 Series Скачать руководство пользователя страница 69

Страница: 69 / 513

Summit WM3000 Series Controller System Reference Guide

Click the

Abort

button to cancel the file transfer process before it is complete.

Click the

Close

button to exit the Transfer screen and return to the Config Files screen. Once a file is

transferred, there is nothing else to be saved within the Transfer screen.

Viewing Controller Firmware Information

The controller can store (retain) two software versions (primary and secondary). Information supporting
the two versions displays within the

Firmware

screen. The

Version

column displays the version string.

The

Build Time

is the date and time each version was generated.

Install

represents the

date and time the

upgrade was performed.

Next Boot

indicates which version should be used on the next reboot. The Next

Boot version should match the

Running Version

, unless the system has failed over to another version.

To view the firmware files available to the controller:

Select

Controller

Firmware

from the main menu tree.

Refer to the following information displayed within the Firmware screen:

Image

Displays whether a firmware image is the primary image or a secondary

image. The primary image is typically the image loaded when the

controller boots.

Version

Displays a unique alphanumeric version for each firmware file listed.

Содержание Summit WM3000 Series


































































































































































































































































































































































































































































































































Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды

Extreme Networks Summit WM3000 Series, Справочное руководство

Результаты поиска

Содержание Summit WM3000 Series

Отзывы:

Похожие инструкции для Summit WM3000 Series

Бренды по названию

Популярные бренды