Extreme Networks Summit WM3000 Series, Справочное руководство

Страница: 210 / 513

Network Setup
Summit WM3000 Series Controller System Reference Guide
210
5 Refer to the Select/Change Assigned WLAN field for the following information:
6 Click Apply to save the changes made within the screen.
7 Click Revert to cancel the changes made and revert back to the last saved configuration.
Configuring WMM
Use the WMM tab to review each radio type, as well as the Access Category that defines the data
(Video, Voice, Best Effort and Background) the radio has been configured to process. Additionally, the
WMM tab displays the transmit intervals defined for the target access category.
To view existing WMM Settings:
1 Select Network Setup > Access Point Adoption Defaults from the main menu tree.
2 Click the WMM tab.
Primary WLAN
If a specific BSS was selected from the
Select Radio/BSS
area, choose
one of the selected WLANs from the drop-down menu as the primary
WLAN for the BSS.
If the radio was selected, the applet will automatically assign one WLAN
to each BSS in order, and that WLAN will be set as the
Primary WLAN
for the BSS. The primary WLAN is the only SSID to broadcast on the
beacon. Other WLANs are present and respond to probe responses from
mobile units.
If the number of WLANs selected is greater than the number of BSSIDs,
the remaining WLANs are included with the last BSS.
Assign
Assign the WLAN(s) to the selected BSS or Radio.
Index
Displays (in ascending order) the numerical index assigned to each SSID.
Use the index (along with the WLANs name) as a means of identifying
WLANs once assigned to different radio BSSIDs. A BSSID cannot support
two WLANs with the same numerical index.
Description
Use the WLAN description (along with the WLANs index) as a means of
identifying WLANs assigned to different radio BSSIDs. A BSSID cannot
support two WLANs with the same description.
ESS ID
Displays the assigned SSID uniquely distributed between the WLANs
assigned to the BSSIDs.
VLAN ID
Displays the VLAN ID of VLANs assigned to WLANs. By default, all
WLANs are assigned to VLAN 1.