Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

Страница: 98 / 496

Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.1 Concepts Guide
98
To disable the Smart Redundancy feature, use the following command:
disable smartredundancy <port_list>
Verifying Software-Controlled Redundant Port Configurations
You can verify the software-controlled redundant port configuration by issuing a variety of CLI
commands.
To display the redundant ports as well as which are active or members of load-sharing groups, use the
following command:
show ports redundant
Sample output looks like the following:
Primary: *1:1 Redundant: 3:1, Link on/off option: OFF
Flags: (*)Active, (!) Disabled, (g) Load Share Group
To display information on which ports are primary and redundant software-controlled redundancy
ports, use the following commands:
show ports information
show port <port_list> information detail
The following is sample output of the
show port 1:1 information detail
after redundancy is
configured:
Virtual-router: VR-Default
Type: UTP
Random Early drop: Disabled
Admin state: Enabled with auto-speed sensing auto-duplex
Link State: Active, 100Mbps, full-duplex
Link Counter: Up 1 time(s)
VLAN cfg:
Name: peggy, Internal Tag = 4094, MAC-limit = No-limit
STP cfg:
Protocol:
Name: peggy Protocol: ANY Match all protocols.
Trunking: Load sharing is not enabled.
EDP: Enabled
DLCS: Unsupported
lbDetect: Unsupported
Learning: Enabled
Flooding: Enabled
Jumbo: Disabled
BG QoS monitor: Unsupported
QoS Profile: None configured
Queue:
QP1 MinBw = 0% MaxBw = 100% Pri = 1
QP2 MinBw = 0% MaxBw = 100% Pri = 2
QP3 MinBw = 0% MaxBw = 100% Pri = 3
QP4 MinBw = 0% MaxBw = 100% Pri = 4
QP5 MinBw = 0% MaxBw = 100% Pri = 5