manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

"Extreme Networks ExtremeWare XOS 11.1" - Руководство пользователя можно бесплатно скачать с сайта manualshive.com. Это операционная система, которая обеспечивает надежную и эффективную работу сетей. Скачайте подробное руководство, чтобы максимально использовать функционал продукта.

Поделиться
Скачать
background image

 

ExtremeWare XOS 11.1 Concepts Guide

476

Index of Commands

configure ip-mtu vlan, 84, 85
configure iproute add default, 45, 49, 370
configure iproute priority, 369
configure jumbo-frame size, 84
configure log filter, 137, 139
configure log filter events match, 140
configure log target, 135
configure log target filter, 135
configure log target format, 140
configure log target match, 138
configure log target syslog, 134
configure netlogin add mac-list, 238
configure netlogin base-url, 236
configure netlogin delete mac-list, 238
configure netlogin redirect-page, 237
configure node slot priority, 52
configure ospf area external-filter, 182
configure ospf area interarea-filter, 182
configure ospf area nssa, 387
configure ospf area stub, 386
configure ospf area timer, 393
configure ospf ase-limit, 385
configure ospf timer, 393
configure ospf virtual-link timer, 393
configure ospf vlan area, 386
configure ospf vlan timer, 391, 393
configure pim add vlan, 413
configure ports auto off, 35, 82
configure ports auto on, 82
configure ports limit-learning, 226
configure ports lock-learning, 227
configure ports qosprofile, 215
configure ports redundant, 97
configure ports unlock-learning, 228
configure protocol add, 159
configure qosprofile ingress, 223
configure radius server client-ip, 242
configure radius shared-secret, 242, 243
configure radius timeout, 242
configure radius-accounting, 243
configure radius-accounting timeout, 243
configure rip import-policy, 182
configure rip trusted-gateway, 182
configure rip vlan route-policy, 182
configure sflow agent, 144
configure sflow collector, 145
configure sharing add ports, 89
configure sharing address-based, 88
configure sharing delete ports, 89
configure slot module, 35, 79, 434
configure snmp add community, 58
configure snmp add trapreceiver community, 58
configure snmp delete trapreceiver, 58
configure snmpv3 add access, 61

configure snmpv3 add filter subtree type, 65
configure snmpv3 add filter-profile param, 65
configure snmpv3 add group user, 62
configure snmpv3 add mib-view, 63
configure snmpv3 add mib-view subtree, 63
configure snmpv3 add notify tag, 66
configure snmpv3 add target-addr param 
ipaddress, 64
configure snmpv3 add target-params, 60
configure snmpv3 add user, 61
configure snmpv3 delete access, 62
configure snmpv3 delete filter, 65
configure snmpv3 delete filter-profile, 66
configure snmpv3 delete group user, 62
configure snmpv3 delete mib-view, 63
configure snmpv3 delete notify, 66
configure snmpv3 delete target-addr, 64
configure snmpv3 delete target-params, 65
configure snmpv3 delete user, 61
configure snmpv3 engine-boots, 61
configure snmpv3 engine-id, 60
configure snmpv3 target-params user mp-model,
65
configure sntp-client, 68
configure sntp-client update-interval, 68
configure ssh2 key, 35, 249
configure ssh2 key pregenerated, 249
configure stpd add vlan, 299, 319
configure stpd default-encapsulation, 298
configure stpd delete vlan, 300
configure stpd mode, 297
configure stpd ports link-type, 310
configure stpd ports mode, 298
configure stpd tag, 319
configure sys-health-check interval, 128, 447
configure sys-recovery-level, 36, 130
configure telnet port, 49
configure telnet vr, 49
configure time, 36
configure timezone, 36, 67
configure vlan add esrp elrp-poll ports, 347
configure vlan add ports, 299
configure vlan dhcp-address-range, 239
configure vlan dhcp-lease-timer, 239
configure vlan dhcp-options, 239
configure vlan esrp elrp-master-poll enable, 347
configure vlan ipaddress, 36, 48, 370
configure vlan name, 160
configure vlan qosprofile, 215
configure vr add ports, 172
configure vr add protocol, 173
configure vr delete ports, 172
configure vr delete protocol, 173
configure vrrp vlan vrid add track-iproute, 356

Содержание ExtremeWare XOS 11.1

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ExtremeWare XOS 11.1

FARONICS DEVICE FILTER MAC Product Data Sheet preview
DEVICE FILTER MAC
Бренд: FARONICS Страницы: 2
Generic Media gMovie v1.4 Operating Instructions Manual preview
gMovie v1.4
Бренд: Generic Media Страницы: 17
Tascam Portastudio iPad Application User Manual preview
Portastudio iPad Application
Бренд: Tascam Страницы: 5
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Бренд: Alphasmart Страницы: 4
altiris eXpress Altris eXpress Helpdesk Solution 5.6 SP1 User Manual preview
eXpress Altris eXpress Helpdesk Solution 5.6 SP1
Бренд: altiris Страницы: 143
SanDisk Membrain Software User Manual preview
Membrain Software
Бренд: SanDisk Страницы: 14
IBM BJ0NJML - Service And Asset Management Integration Manual preview
BJ0NJML - Service And Asset Management
Бренд: IBM Страницы: 330
ESET SMART SECURITY User Manual preview
SMART SECURITY
Бренд: ESET Страницы: 38
ADS Technologies DVR Quick Manual preview
DVR
Бренд: ADS Technologies Страницы: 2
R&S SMW-K555 User Manual preview
SMW-K555
Бренд: R&S Страницы: 45
Altigen ACM 6.5 Administration Manual preview
ACM 6.5
Бренд: Altigen Страницы: 502
FieldServer FS-8700-84 Driver Manual preview
FS-8700-84
Бренд: FieldServer Страницы: 39
Nintendo RVLRRFPE Instruction Booklet preview
RVLRRFPE
Бренд: Nintendo Страницы: 34
IBM TIVOLI SC23-8765-00 User Manual preview
TIVOLI SC23-8765-00
Бренд: IBM Страницы: 74
NEC SOFTDVD PLAYER Installation Manual preview
SOFTDVD PLAYER
Бренд: NEC Страницы: 6
MACROMEDIA BREEZE PRESENTER Manual preview
BREEZE PRESENTER
Бренд: MACROMEDIA Страницы: 106
GE POWER LEADER GEH-6510 User Manual preview
POWER LEADER GEH-6510
Бренд: GE Страницы: 92
Lenovo ThinkPad Edge 11 Hardware Maintenance Manual preview
ThinkPad Edge 11
Бренд: Lenovo Страницы: 130

Бренды по названию

Популярные бренды

Загрузить еще бренды