Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

Страница: 171 / 496

Using Virtual Routers—BlackDiamond 10K Switch Only
ExtremeWare XOS 11.1 Concepts Guide
171
Virtual Router Configuration Domain—BlackDiamond 10K Switch
Only
When you create virtual routers, you must configure each virtual router separately, configuring routing
protocols and VLANs for each one. To simplify the configuration process, the concept of a virtual router
configuration domain was introduced in ExtremeWare XOS 11.0. Under a virtual router configuration
domain, any virtual router commands are applied only to that virtual router. The virtual router
commands consist of all the BGP, OSPF, PIM and RIP commands, and the commands listed in
Table 23 .
Table 23: Virtual router commands
* means that other commands are available with these listed.
The virtual router configuration domain simplifies configuration because you do not have to specify the
virtual router for each individual protocol configuration command. The current configuration domain is
indicated in the command line interface (CLI) prompt by the name of the User virtual router, or no
name if in the VR-Default domain.
Using Virtual Routers—BlackDiamond 10K Switch Only
To use the user virtual router functionality in ExtremeWare XOS, you will need to do the following
things:
●
Create the virtual router
●
Add ports to the virtual router
[enable | disable] ipforwarding
clear iparp *
clear counters iparp *
configure iparp *
configure iparp [add | delete] *
[enable | disable] iparp *
show iparp *
configure iproute [add | delete] *
show iproute *
show ipstats *
rtlookup
create [vlan | vman] <vlan-name>
[enable | disable] igmp
[enable | disable] igmp snooping
[enable | disable] ipmcforwarding
show igmp
show igmp snooping
show igmp group
show igmp snooping cache