Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

Страница: 38 / 496

Accessing the Switch
ExtremeWare XOS 11.1 Concepts Guide
38
Administrator Account
A person with an administrator-level account can view and change all switch parameters. With this
level, you can also add and delete users, as well as change the password associated with any account
name (to erase the password, issue the
unconfigure switch {all}
command).
The administrator can disconnect a management session that has been established by way of a Telnet
connection. If this happens, the user logged on by way of the Telnet connection is notified that the
session has been terminated.
If you have logged on with administrator capabilities, the command line prompt ends with a (#) sign.
For example:
BD-1.18 #
Prompt Text
You must have an administrator-level account to change the text of the prompt. The prompt text is
taken from the SNMP
sysname
setting. The number that follows the colon indicates the sequential line
of the specific command or line.
If an asterisk (*) appears in front of the command line prompt, it indicates that you have outstanding
configuration changes that have not been saved. For example:
* BD-1.19 #
Default Accounts
By default, the switch is configured with two accounts, as shown in Table 7 .
Changing the Default Password
Default accounts do not have passwords assigned to them. Passwords can have a minimum of 0
character and can have a maximum of 32 characters.
NOTE
Passwords are case-sensitive; user names are not case-sensitive.
Table 7: Default accounts
Account Name Access Level
admin This user can access and change all manageable parameters. However, the user may not
delete all admin accounts.
user This user can view (but not change) all manageable parameters, with the following
exceptions:
• This user cannot view the user account database.
• This user cannot view the SNMP community strings.