Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

Страница: 93 / 496

Switch Port Mirroring
ExtremeWare XOS 11.1 Concepts Guide
93
●
The mirroring filters are not confined to a single module; they can have ports that span multiple
modules.
●
You cannot use the management port at all in switch port-mirroring configurations.
Switch Port-Mirroring Examples
The following example removes all port-mirroring configuration from the switch:
disable mirroring
NOTE
When you change the mirroring configuration, the switch stops sending egress packets from the monitor port until
the change is complete. The ingress mirroring traffic to the monitor port and regular traffic are not affected.
Aspen 8810 Switch Only
The following example selects slot 3, port 4 as the monitor port and sends all traffic received at slot 6,
port 5 to the monitor port:
enable mirroring to port 3:4
configure mirroring add port 6:5 ingress
The following example selects slot 3, port 4 as the monitor port and send all traffic sent from slot 6, port
5 to the monitor port:
enable mirroring to port 3:4
configure mirroring add port 6:5 egress
BlackDiamond10K Switch Only
The following example selects slot 7, port 3 as the untagged monitor port, and sends all traffic coming
into or out of a modular switch on slot 7, port 1 to the monitor port:
enable mirroring to port 7:3 untagged
configure mirroring add port 7:1
The following example sends all traffic coming into or out of the system on slot 8, port 1 and the VLAN
default to the untagged monitor port, which is slot 7, port 3:
enable mirroring to port 7:3 untagged
configure mirroring add port 8:1 vlan default
Verifying the Switch Port-Mirroring Configuration
The screen output resulting from the
show mirroring
command lists the ports that are involved in load
sharing, or link aggregation, and which is the primary port. The display differs slightly depending on
the platform.