Extreme Networks ExtremeWare XOS 11.1, Руководство пользователя

Страница: 30 / 496

ExtremeWare XOS Overview
ExtremeWare XOS 11.1 Concepts Guide
30
NOTE
For default settings of individual ExtremeWare XOS features, see individual chapters in this guide.
ESRP Disabled
QoS All traffic is part of the default queue (QP1).
QoS—802.1p replacement Disabled
QoS—DiffServ examination Disabled
Autonegotiation • 10 G modules—autonegotiation OFF, speed 10000 Mbps, full-
duplex
• 1 G modules—autonegotiation ON
802.3x flow control • 10 G modules—ON
• 1 G fiber and copper—ON
Virtual LANs Two VLANs are predefined; the VLAN named default contains all
ports and belongs to the Spanning Tree Protocol Domain (STPD)
named s0. The VLAN mgmt exists only on switches that have an
Ethernet management port and contains only that port. The switch
uses the Ethernet management port for host operation only, not for
switching or routing.
802.1Q tagging All packets are untagged on the default VLAN (default).
Spanning Tree Protocol Disabled for the switch; enabled for each port in the STPD.
STPD port encapsulation mode • default STPD—802.1D mode
• user-created STPD—Extreme Multiple Instance Spanning Tree
Protocol (EMISTP)
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
Smart Redundancy Enabled
System health check Enabled
RADIUS authentication port value 1812
RADIUS accounting port value 1813
OSPF link type Auto
VRRP priority 100
IGMP Enabled
IGMP snooping Enabled
PoE power to port Enabled
PoE power per slot 50 W
PoE port priority Low
ELRP Disabled
Net Login Disabled
Table 3: ExtremeWare XOS version 11.1 global factory defaults (Continued)
Item Default Setting