Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 467 / 908

Extreme Networks EAS 200-24p Switch CLI Manual
467
C H A P T E R
30
Link Layer Discovery Protocol
(LLDP) Command List
●
enable lldp
●
disable lldp
●
config lldp [message_tx_interval <sec 5-32768> | message_tx_hold_multiplier <int
2-10> | tx_delay <sec 1-8192> | reinit_delay <sec 1-10>]
●
config lldp notification_interval <sec 5-3600>
●
config lldp ports [<portlist> | all] [notification [enable | disable] |
admin_status [tx_only | rx_only | tx_and_rx | disable] | mgt_addr [ipv4 <ipaddr>
| ipv6 <ipv6addr>] [enable | disable] | basic_tlvs [{all} | {port_description |
system_name | system_description | system_capabilities}] [enable | disable] |
dot1_tlv_pvid [enable | disable] | dot1_tlv_protocol_vid [vlan [all | <vlan_name
32>] | vlanid <vidlist>] [enable | disable] | dot1_tlv_vlan_name [vlan [all |
<vlan_name 32>] | vlanid <vidlist>] [enable | disable] |
dot1_tlv_protocol_identity [all | {eapol | lacp | gvrp | stp}] [enable | disable]
| dot3_tlvs [{all} | {mac_phy_configuration_status | link_aggregation |
power_via_mdi | maximum_frame_size}] [enable | disable]]
●
config lldp forward_ message [enable | disable]
●
show lldp
●
show lldp mgt_addr {ipv4 <ipaddr> | ipv6 <ipv6addr>}
●
show lldp ports {<portlist>}
●
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
●
show lldp remote_ports {<portlist>} [brief | normal | detailed]
●
show lldp statistics
●
show lldp statistics ports {<portlist>}