Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 745 / 908

create snmp group
Extreme Networks EAS 200-24p Switch CLI Manual
745
create snmp group
Description
This command is used to create a new SNMP group, or a table that maps SNMP users to SNMP views.
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]] {read_view <view_name 32> | write_view <view_name 32> |
notify_view <view_name 32>}
Parameters
●
group - Specifies the name of the group.
●
<groupname 32> - Enter the group name here. This name can be up to 32 characters long.
●
v1 - The least secure of the possible security models.
●
v2c - The second least secure of the possible security models.
●
v3 - The most secure of the possible.
●
noauth_nopriv - Neither support packet authentication nor encrypting.
●
auth_nopriv - Support packet authentication.
●
auth_priv - Support packet authentication and encrypting.
●
read_view - (Optional) Specifies that the view name would be read.
●
<view_name 32> - Enter the read view name here. This name can be up to 32 characters long.
●
write_view - (Optional) Specifies that the view name would be write.
●
<view_name 32> - Enter the wite view name here. This name can be up to 32 characters long.
●
notify_view - (Optional) Specifies that the view name would be notify.
●
<view_name 32> - Enter the notify view name here. This name can be up to 32 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create SNMP group “group123”:
EAS 200-24p:admin# create snmp group group123 v3 auth_priv read_view
CommunityView write_view CommunityView notify_view CommunityView
Command: create snmp group group123 v3 auth_priv read_view CommunityView
write_view CommunityView notify_view CommunityView
Success.
EAS 200-24p:admin#