Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 710 / 908

Chapter 51: sFlow Command List
Extreme Networks EAS 200-24p Switch CLI Manual
710
create sflow analyzer_server
Description
This command is used to create the analyzer server. You can specify more than one analyzer_server
with the same IP address but with different UDP port numbers. You can have up to four unique
combinations of IP address and UDP port number.
Format
create sflow analyzer_server <value 1-4> owner <name 16> {timeout [<sec 1-
2000000> | infinite] | collectoraddress <ipaddr> | collectorport
<udp_port_number 1-65535> | maxdatagramsize <value 300-1400>}
Parameters
●
analyzer_server - The ID of analyzer server.
●
<value 1-4> - Enter the analyzer server ID here.
●
owner - The entity making use of this sFlow analyzer_server. When owner is set or modified, the
timeout value will become 400 automatically.
●
<name 16> - Enter the owner name here. This name can be up to 16 characters long.
●
timeout - (Optional) The seconds to wait before the server is timed out. When the analyzer server
times out, all of the flow_samplers and counter_pollers associated with this analyzer server will be
deleted. The default value is 400 seconds.
●
<sec 1-2000000> - Enter the time-out value here. This value must be between 1 and 2000000
seconds.
●
infinite - Indicates the analyzer server never timeout.
●
collectoraddress - (Optional) The IP or IPv6 address of the analyzer server. If this is set to 0 or not
specified, the IP address is 0 and the entry is not active.
●
<ipaddr> - Enter the IP address used for the configuration here.
●
collectorport - (Optional) The destination UDP port for sending the sFlow datagram. If not specified,
the default value is 6364. The specified UDP port number can NOT conflict with other applications.
●
<udp_port_number 1-65535> - Enter the destination UDP port number here. This value must be
between 1 and 65535.
●
maxdatagramsize - (Optional) The maximum number of data bytes that can be packed in a single
sample datagram. If not specified, the default value is 1400 bytes.
●
<value 300-1400> - Enter the maximum datagram size here. This value must be between 300 and
1400.
Restrictions
Only Administrator and Operator-level users can issue this command.