Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 177 / 908

config egress_access_profile
Extreme Networks EAS 200-24p Switch CLI Manual
177
config egress_access_profile
Description
This command is used to configure egress access list entries.
Format
config egress_access_profile [profile_id <value 1-4> | profile_name <name 1-
32>] [add access_id [auto_assign | <value 1-128>] [ethernet {[vlan <vlan_name
32> | vlan_id <vlanid 1-4094>] {mask <hex 0x0-0x0fff>} | source_mac <macaddr>
{mask <macmask>} | destination_mac <macaddr> {mask <macmask>} | 802.1p <value
0-7> | ethernet_type <hex 0x0-0xffff>} | ip {[vlan <vlan_name 32> | vlan_id
<vlanid 1-4094>] {mask <hex 0x0-0x0fff>} | source_ip <ipaddr> {mask <netmask>}
| destination_ip <ipaddr> {mask <netmask>} | dscp <value 0-63> | [icmp {type
<value 0-255> | code <value 0-255>} | igmp {type <value 0-255>} | tcp
{src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535>
{mask <hex 0x0-0xffff>} | flag [all | {urg | ack | psh | rst | syn | fin}]} |
udp {src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-
65535> {mask <hex 0x0-0xffff>}} | protocol_id <value 0-255> {user_define <hex
0x0-0xffffffff> {mask <hex 0x0-0xffffffff>}}]} | ipv6 {class <value 0-255> |
source_ipv6 <ipv6addr> {mask <ipv6mask>} | destination_ipv6 <ipv6addr> {mask
<ipv6mask>} | [tcp {src_port <value 0-65535> {mask <hex 0x0-0xffff>} |
dst_port <value 0-65535> {mask <hex 0x0-0xffff>}} | udp {src_port <value 0-
65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535> {mask <hex 0x0-
0xffff>}} | icmp {type <value 0-255> | code <value 0-255>}]}] [vlan_based
[vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] | port_group [id <value 1-64>
| name <name 16>] | port <port>] [permit {replace_priority_with <value 0-7> |
replace_dscp_with <value 0-63> | counter [enable | disable]} | deny]
{time_range <range_name 32>} | delete access_id <value 1-128>]
Parameters
●
profile_id - Specifies the index of the egress access list profile.
●
<value 1-4> - Enter the profile ID used here. This value must be between 1 and 4.
●
profile_name - Specifies the name of the profile.
●
<name 1-32> - Enter the profile name here. This name can be up to 32 characters long.
●
add - Specifies to add a profile or rule.
●
access_id - Specifies the index of the access list entry. If the auto_assign option is selected, the access
ID is automatically assigned.
●
auto assign - Specifies that the access ID will be configured automatically.
●
<value 1-128> - Enter the access ID used here. This value must be between 1 and 128.
●
ethernet - Specifies an Ethernet egress ACL rule.
●
vlan - (Optional) Specifies the VLAN name.
●
<vlan_name 32> - Enter the VLAN name used for this configuration here. This name can be up
to 32 characters long.
●
vlanid - Specifies a VLAN ID.