Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 800 / 908

Chapter 56: System Log Command List
Extreme Networks EAS 200-24p Switch CLI Manual
800
show attack_log
Description
Displays the attack log messages. The attack log message refers to log messages driven by modules such
as DOS and the IP-MAC-port binding module. This type of log message may generate a large amount
of messages and quickly cause the system to run out of system log storage. Therefore, for this type of
log messages only the first log that is generated each minute can be stored in the system log, with the
rest of them being stored in a separate table named attack log.
Format
show attack_log {index <value_list>}
Parameters
●
index - (Optional) The list of index numbers of the entries that need to be displayed. For example,
show attack_log index 1-5 will display the attack log messages from 1 to 5.
●
<value_list> - Enter the index numbers of the entries that needs to be displayed here.
If no parameter is specified, all entries in the attack log will be displayed.
Restrictions
None.
Example
To show dangerous messages on the master:
EAS 200-24p:admin# show attack_log index 1
Command: show attack_log index 1
Index Date Time Level Log Text
----- ---------- -------- -------- ----------------------------------------------
1 2008-10-17 15:00:14 CRIT(2) Land attack is blocked from (IP: 10.72.24.1
Port: 7)
EAS 200-24p:admin#