Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 712 / 908

Chapter 51: sFlow Command List
Extreme Networks EAS 200-24p Switch CLI Manual
712
config sflow analyzer_server
Description
Configures the receiver information. You can specify more than one collector with the same IP address
if the UDP port numbers are unique.
Format
config sflow analyzer_server <value 1-4> {timeout [<sec 1-2000000> | infinite]
| collectoraddress <ipaddr> | collectorport <udp_port_number 1-65535> |
maxdatagramsize <value 300-1400>}
Parameters
●
analyzer_server - The ID of analyzer server.
●
<value 1-4> - Enter the analyzer server ID here. This value must be between 1 and 4.
●
timeout - (Optional) The time (in seconds) remaining before the sample is released and stops
sampling. When the analyzer_server times out, all of the flow_samplers and counter_pollers
associated with this analyzer_server will be deleted.
●
<sec 1-2000000> - Enter the time-out value here. This value must be between 1 and 2000000
seconds.
●
infinity - Indicates the analyzer server never timeout
●
collectoraddress - (Optional) The IP address of the server. If not specified or set a 0 address, sFlow
packets will not be sent to this server.
●
<ipaddr> - Enter the IP address used for the configuration here.
●
collectorport - (Optional) The destination UDP port for sending the sFlow datagram. If not specified,
the default value is 6364
●
<udp_port_number 1-65535> - Enter the destination port number here. This value must be
between 1 and 65535.
●
maxdatagramsize - (Optional) The maximum number of data bytes that can be packed in a single
sample datagram. If not specified, the default value is 1400 bytes.
●
<value 300-1400> - Enter the maximum datagram size here. This value must be between 300 and
1400.
Restrictions
Only Administrator and Operator-level users can issue this command.