Extreme Networks EAS 200-24p Switch, Руководство пользователя

Страница: 650 / 908

Chapter 47: QinQ Command List
Extreme Networks EAS 200-24p Switch CLI Manual
650
create vlan_translation ports
Description
This command is used to create a VLAN translation rule. This setting will not be effective when the
QinQ mode is disabled.
This configuration is only effective for a UNI port. At UNI port, the ingress C-VLAN tagged packets
will be translated to S-VLAN tagged packets by adding or replacing according the configured rule. The
S-VLAN Tag of egress packets at this port will be recovered to C-VLAN Tag or stripped.
Format
create vlan_translation ports [<portlist> | all] [add cvid <vidlist> | replace
cvid <vlanid 1-4094>] svid <vlanid 1-4094> {priority <priority 0-7>}
Parameters
●
ports - Specifies a list of ports to be configured.
●
<portlist> - Enter the list of ports to be configured here.
●
all - Specifies that all the ports will be used for the configuration.
●
add - Specifies to add an S-Tag to the packet.
●
cvid - Specifies the customer VLAN ID used.
- <vidlist> - Enter the customer VLAN ID used here.
●
replace - Specifies to replace the C-Tag with the S-Tag.
●
cvid - Specifies the customer VLAN ID used.
- <vlanid 1-4094> - Enter the customer VLAN ID used here.
●
svid - Specifies the service provider VLAN ID used.
- <vlanid 1-4094> - Enter the service provider VLAN ID used here.
●
priority - (Optional) Specifies to assign an 802.1p priority to the S-Tag. If the priority is not specified,
a 802.1p priority of the S-Tag will be assigned by default.
●
<priority 0-7> - Enter the 802.1p S-Tag priority value here. This value must be between 0 and 7.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.