Extreme Networks Altitude 4700 Series, Руководство по продукции

Страница: 494 / 648

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
494
AP4700>admin(system.snmp.access)>add
Adds SNMP access entries for specific v1v2 and v3 user definitions.
Syntax
For information on configuring SNMP access settings using the applet (GUI), see “Configuring SNMP
Access Control” on page 101 .
add acl <ip1> <ip2> Adds an entry to the SNMP access control list with <ip1> as the starting IP
address and <ip2> and as the ending IP address.
v1v2c <comm> <access> <oid>
: comm - community string 1 to 31 characters
: access - read/write access - (ro,rw)
: oid - string 1 to 127 chars - E.g. 1.3.6.1
v3 <user> <access> <oid> <sec>
<auth> <pass1> <priv> <pass2>
: user - username 1 to 31 characters
: access - read/write access - (ro,rw)
: oid - string 1 to 127 chars - E.g. 1.3.6.1
: sec - security - (none,auth,auth/priv)
: auth - algorithm - (md5,sha1)
: (required only if sec is - auth,auth/priv)
: pass1 - auth password - 8 to 31 chars
: (required only if sec is 'auth,auth/priv')
: priv - algorithm - (des, aes)
: (required only if sec is 'auth/priv')
: pass2 - privacy password - 8 to 31 chars
: (required only if sec is 'auth/priv')
The following parameters must be specified if <sec> is not none:
Authentication type <auth> set to md5 or sha1
Authentication password <pass1> (8 to 31 chars)
The following parameters must be specified if <sec> is set to auth/priv:
Privacy algorithm set to des or aes
Privacy password <pass2> (8 to 31 chars)