Extreme Networks Altitude 4700 Series, Руководство по продукции

Страница: 229 / 648

Altitude 4700 Series Access Point Product Reference Guide
229
Creating a VPN Tunnel between Two Access Points
This section describes how to define a simple configuration using two Access Points to create an IPSec
tunnel.
To create a IPSec VPN tunnel between two Access Points:
1 Ensure the WAN ports are connected via the internet
2 Select Network Configuration > WAN > VPN from the access point menu tree.
3 Enter any tunnel name (tunnel names do not need to match).
4 Enter the WAN port IP address of AP #1 in the Local WAN IP field.
5 Enter the LAN IP subnet and mask of AP #2 in the Remote Subnet and Remote Subnet Mask fields.
6 Enter the WAN port IP address of AP #2 in the Remote Gateway field.
7 Click Add to add the tunnel to the list.
8 Select the Auto (IKE) Key Exchange button.
9 Select Auto Key Settings .
10 Select ESP with Authentication and AES 128-bit . Click OK .
11 Select the IKE Settings button.
12 Select Pre Shared Key (PSK) .
13 Enter the Passphrase.
Passphrases must match on both VPN devices.
14 Select AES 128-bit .
15 Select Group 2 .
16 Click OK .
This will take you back to the main VPN configuration screen.
17 Click Apply to save the updates
18 Select Network Configuration > WAN > VPN > VPN Status from the access point menu tree. Check the
VPN status on the Access Point.