Extreme Networks Altitude 4700 Series, Руководство по продукции

Страница: 289 / 648

Altitude 4700 Series Access Point Product Reference Guide
289
2 Click the Clear Known AP Stats button to reset each of the data collection counters to zero in order to
begin new data collections.
3 Click the Details button to display Access Point address and radio information.
The Known AP Details screen displays the target AP’s MAC address, IP address, radio channel,
number of associated MUs, packet throughput per second, radio type(s), model, firmware version,
ESS and client bridges currently connected to the AP radio. Use this information to determine
whether this AP provides better MU association support than the locating Access Point or warrants
consideration as a member of a different mesh network.
4 Click the Ping button to display a screen for verifying the link with a highlighted Access Point.
NOTE
A ping test initiated from the access point Known AP Statistics screen uses WNMP pings. Therefore,
target devices that are not Extreme Networks Access Points are unable to respond to the ping test.
5 Click the Send Cfg to APs button to send the your Access Point’s configuration to other Access
Point’s. The recipient Access Point must be the same dual-radio model as the Access Point sending
the configuration. The sending and recipient Access Point’s must also be running the same major
firmware version.
CAUTION
When using the Send Cfg to APs function to migrate an Access Point’s configuration to other Access
Points, it is important to keep in mind mesh network configuration parameters do not get completely sent to
other Access Points. The Send Cfg to APs function will not send the “auto-select” and “preferred list” settings.