manualshive.com logo in svg

Extreme Networks Altitude 4700 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 4700 Series Скачать руководство пользователя страница 227

 

Altitude 4700 Series Access Point Product Reference Guide

227

NOTE

When creating a tunnel, the remote subnet and remote subnet mask must be that of the target device’s 

LAN settings. The remote gateway must be that of the target device’s WAN IP address.

If Access Point #1 has the following values:

●

WAN IP address

: 20.1.1.2

●

LAN IP address:

 10.1.1.1

●

Subnet Mask:

 255.0.0.0

Then, the VPN values for Access Point #2 should be:

●

Remote subnet: 10.1.1.0 or 10.0.0.0

●

Remote subnet mask: 255.0.0.0

●

Remote gateway: 20.1.1.2

3

If a VPN tunnel has been added to the list of available access point tunnels, use the 

VPN Tunnel 

Config 

field to optionally modify the tunnel’s properties.

Del 

Click 

Del 

to delete a highlighted VPN tunnel. There is no 

confirmation before deleting the tunnel. 

Tunnel Name

The 

Tunnel Name 

column lists the name of each VPN 

tunnel on the 

access point

.

Remote Subnet

The 

Remote Subnet 

column lists the remote subnet for 

each tunnel. The remote subnet is the subnet the remote 
network uses for connection. 

Remote Gateway

The 

Remote Gateway 

column lists a remote gateway IP 

address for each tunnel. The numeric remote gateway is 
the gateway IP address on the remote network the VPN 
tunnel connects to. Ensure the address is the same as the 
WAN port address of the target gateway AP or controller.

Key Exchange 
Type

The 

Key Exchange Type

 column lists the key exchange 

type for passing keys between both ends of a VPN tunnel. 
If 

Manual Key Exchange

 is selected, this column displays 

Manual. If 

Auto (IKE) Key Exchange 

is selected, the field 

displays 

Automatic

.

Tunnel Name

Enter a name to define the VPN tunnel. The tunnel name 
is used to uniquely identify each tunnel. Select a name 
best suited to that tunnel’s function so it can be selected 
again in the future if required in a similar application.

Interface name

Use the drop-down menu to specify the LAN1, LAN2 or 
WAN connection used for routing VPN traffic. Remember, 
only one LAN connection can be active on the Access 
Point Ethernet port at a time. The LAN connection 
specified from the LAN screen to receive priority for 
Ethernet port connectivity may be the better subnet to 
select for VPN traffic.

Local WAN IP

Enter the WAN’s numerical (non-DNS) IP address in order 
for the tunnel to pass traffic to a remote network.

Remote Subnet 

Specify the numerical (non-DNS) IP address for the 
Remote Subnet.

Remote Subnet 
Mask

Enter the subnet mask for the tunnel’s remote network for 
the tunnel. The remote subnet mask is the subnet setting 
for the remote network the tunnel connects to.

Содержание Altitude 4700 Series









































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды