Monitoring Statistics
Altitude 4700 Series Access Point Product Reference Guide
274
3
Refer to the
Traffic
field to view performance and throughput information for the WLAN selected
from the access point menu tree.
4
Refer to the
RF Status
field to view the following MU signal, noise and performance information for
the WLAN selected from the access point menu tree.
Pkts per second
The
Total
column displays the average total packets per
second crossing the selected WLAN. The
Rx
column
displays the average total packets per second received on
the selected WLAN. The
Tx
column displays the average
total packets per second sent on the selected WLAN. The
number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic
for the last hour.
Throughput
The
Total
column displays average throughput in Mbps for
a given time period on the selected WLAN. The
Rx
column
displays average throughput in Mbps for packets received
on the selected WLAN. The
Tx
column displays average
throughput for packets sent on the selected WLAN. The
number in black represents statistics for the last 30
seconds and the number in blue represents statistics for
the last hour. Use this information to assess whether the
current access point data rate is sufficient to support
required network traffic.
Avg. Bit Speed
The
Total
column displays the average bit speed in Mbps
for a given time period on the selected WLAN.This
includes all packets that are sent and received. The
number in black represents statistics for the last 30
seconds and the number in blue represents statistics for
the last hour. If the bit speed is significantly slower than
the selected data rate, refer to the
RF Statistics
and
Errors
fields to troubleshoot.
% Non-unicast pkts Displays the percentage of the total packets that are non-
unicast. Non-unicast packets include broadcast and
multicast packets.The number in black represents packets
for the last 30 seconds and the number in blue represents
packets for the last hour.
Avg MU Signal
Displays the average RF signal strength in dBm for all
MUs associated with the selected WLAN. The number in
black represents this statistic for the last 30 seconds and
the number in blue represents this statistic for the last
hour. If the signal is low, consider mapping the MU to a
different WLAN if a better functional grouping of MUs can
be determined.
Avg MU Noise
Displays the average RF noise for all MUs associated with
the selected WLAN. The number in black represents MU
noise for the last 30 seconds and the number in blue
represents MU noise for the last hour. If MU noise is
excessive, consider moving the MU closer to the access
point, or in area with less conflicting network traffic.
Avg MU SNR
Displays the average
Signal to Noise Ratio (SNR)
for all
MUs associated with the selected WLAN. The Signal to
Noise Ratio is an indication of overall RF performance on
your wireless networks.
Содержание Altitude 4700 Series
