Monitoring Statistics
Altitude 4700 Series Access Point Product Reference Guide
284
5
Refer to the
Traffic
field to view individual MU RF throughput information.
6
Refer to the
RF Status
field to view MU signal and signal disturbance information.
7
Refer to the
Errors
field to view MU retry information and statistics on packets not transmitted.
Radio Association
Displays the name of the AP MU is currently associated
with.
QoS Client Type
Displays the data type transmitted by the mobile unit.
Possible types include
Legacy
,
Voice
,
WMM Baseline
and
Power Save
.
Encryption
Displays the encryption scheme deployed by the
associated MU.
Packets per second The
Total
column displays average total packets per
second crossing the MU. The
Rx
column displays the
average total packets per second received on the MU. The
Tx
column displays the average total packets per second
sent on the MU. The number in black represents Pkts per
second for the last 30 seconds and the number in blue
represents Pkts per second for the last hour.
Throughput
The
Total
column displays the average total packets per
second crossing the selected MU. The
Rx
column displays
the average total packets per second received on the MU.
The
Tx
column displays the average total packets per
second sent on the MU. The number in black represents
throughput for the last 30 seconds, the number in blue
represents throughput for the last hour.
Avg. Bit Speed
The
Total
column displays the average bit speed in Mbps
for a given time period on the MU. This includes all
packets sent and received. The number in black
represents average bit speed for the last 30 seconds and
the number in blue represents average bit speed for the
last hour. Consider increasing the data rate of the AP if the
current bit speed does not meet network requirements.
The associated MU must also be set to the higher rate to
interoperate with the access point at that data rate.
% of Non-unicast
pkts
Displays the percentage of the total packets for the
selected mobile unit that are non-unicast. Non-unicast
packets include broadcast and multicast packets. The
number in black represents packets for the last 30
seconds and the number in blue represents packets for the
last hour.
Avg MU Signal
Displays RF signal strength in dBm for the target MU. The
number in black represents signal information for the last
30 seconds and the number in blue represents signal
information for the last hour.
Avg MU Noise
Displays RF noise for the target MU. The number in black
represents noise for the last 30 seconds, the number in
blue represents noise for the last hour.
Avg MU SNR
Displays the
Signal to Noise Ratio (SNR)
for the target
MU. The Signal to Noise Ratio is an indication of overall
RF performance on your wireless network.
Avg Num of Retries Displays the average number of retries for the MU. The
number in black represents average retries for the last 30
seconds and the number in blue represents average
retries for the last hour.
Содержание Altitude 4700 Series
