Extreme Flight 110" YAK-54 V2, Инструкция по сборке

Страница: 38 / 45

Figure 34 pushrods for direct drive 60mm length coated
cable
Ball links crimps
rigging couplers
The rudder pull pull system is started by gluing the included double rudder tray to
the middle tray area if you are using standard size servos. The tray, as is, has one
enlarged slot in case you wanted to use a larger case servo, then you would not use
the optional double rudder tray. Once you determine this you can mount your
servo(s). Plan on using the aft servo bay in the rudder tray for standard case servos,
this will yield more cable working length. Figure 35 shows the rudder tray for
larger case servos and the optional double rudder tray for standard case servos.
Epoxy the optional tray in place over the larger tray if using standard case servos.
38