Specifications
E-Series:
Drive
Pneumatic (Air filled)
Deck Size
44
48 & 52
Quantity
2
2
Tread
Super Turf
Super Turf
Size
22 x 8.50-12
22 x 9.50-12
Ply Rating
4
4
Pressure
13 psi (90 kPa)
13 psi (90 kPa)
E-Series:
Drive
Pneumatic (Air filled)
Deck Size
60
Quantity
2
Tread
Super Turf
Size
22 x 10.50-12
Ply Rating
4
Pressure
13 psi (90 kPa)
Front Caster — All Models
Pneumatic (Air filled)
Deck Size
44
48, 52, & 60
Quantity
2
2
Tread
Smooth
Smooth
Size
13 x 5.00-6
13 x 6.50-6
Ply Rating
4
4
Pressure
13 psi (90 kPa)
13 psi (90 kPa)
Cutting Deck
•
Cutting Width:
– 44 inch Deck: (111.8 cm)
– 48 inch Deck: (121.9 cm)
– 52 inch Deck: (132.1 cm)
– 60 inch Deck: (152.4 cm)
•
Discharge:
– Side Discharge: Non “R” models
– Rear Discharge: “R” models
•
Blade Size:
– 44 inch Deck: 22.25 inches (56.5 cm) – (2 ea.)
– 48 inch Deck: 24.50 inches (62.2 cm) – (2 ea.)
– 48 inch Deck: 16.25 inches (41.3 cm) – (3 ea.)
– 52 inch Deck: 18.00 inches (45.7 cm) – (3 ea.)
– 60 inch Deck: 20.50 inches (52.1 cm) – (3 ea.)
•
Blade Spindles:
– X-Series: Solid steel spindles with .98 inch (25
mm) I.D. bearings.
– S- and E-Series: Solid steel spindles with .67
inch (17 mm) I.D. bearings.
•
Deck Drive: “B” Section belt with self-tensioning
idler.
•
Electric clutch:
–
44 Inch Decks:
118 ft-lb
–
48 & 52 Inch Decks:
125 ft-lb Mag Stop
–
60 Inch Deck:
125 ft-lb Neo-Mag Stop
•
Deck:
– 44 inch Deck: 1 anti-scalp roller
– 48 inch Deck: 3 anti-scalp rollers
– 52 inch Deck: 5 anti-scalp rollers
– 60 inch Deck: 5 anti-scalp rollers
– 60 inch Deck-Rear Discharge:
4 anti-scalp rollers
– Side Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
provide maximum turf protection. Deck
design allows for bagging, mulching or side
discharge.
– Rear Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
and side bumpers provide maximum turf
protection. Deck design allows for rear
discharge or finish cut (reduced discharge).
•
Deck Depth:
–
S- and E-Series:
◊ Side Discharge: 5.0 inches (12.7 cm)
◊ Rear Discharge: 5.5 inches (14.0 cm)
–
X-Series:
All Decks: 5.5 inches (14.0 cm)
•
Cutting Height Adjustment:
Foot activated lever is used to adjust the cutting
height from 1 1/2 inch (3.8 cm) to 5 inches (12.7
cm) in 1/4 inch (6.4 mm) increments.
•
Mulching Kit: Optional.
15
Содержание Radius E Series
