EXFO FTB-8100 Series, Руководство пользователя

Страница: 220 / 518

SONET Tabs
208
FTB-8100 Series Transport Blazer
LOP RX (SONET)
Alarm Analysis
³
AIS-V (Alarm Indication Signal - VT): The AIS-V alarm is declared when
V1 and V2 bytes for the VT path contain an all-ones pattern in three
consecutive superframes.
³
LOP-V
(Loss Of Pointer - VT): The LOP alarm indicates that a valid
pointer is not found in N consecutive superframes (where 8
≤
N
≤
10),
or if N consecutive NDFs (“1001” pattern) are detected.
³
RDI-V (Remote Defect Indication - VT): The RDI-V alarm is declared
when bit 8 of the V5 byte contains “1” in five consecutive VT
superframes while bits 6 and 7 of the Z7 byte contain the “00” or “11”
pattern.
³
RFI-V (Remote Failure Indication - VT): The RFI-V alarm is declared
when bit 4 of the V5 byte contains “1” in five consecutive superframes.
³
TIM-V (Trace Identifier Mismatch - VT): The TIM-V defect indicates that
the received J2 Trace doesn’t match the expected message value. The
TIM-V alarm is only available when
Enable TIM-V check box from J2
Trace section has been selected.
³
The TIM-V alarm result is only available when TIM-V from J2 Trace
section has been enabled.
³
PLM-V (Payload Label Mismatch - VT): The PLM-V is declared upon
receipt of five consecutive superframes with mismatched VT Signal
(bits 5 through 7 of the V5 byte are “000”, “001” or “111”).
³
UNEQ-V
(Unequipped - VT): UNEQ-V is declared when bit 5 through 7
of the V5 byte contain “000” for five consecutive superframes.
³
ERDI-VSD
(Enhanced RDI - VT Server Defect): The ERDI-VSD alarm is
declared when bits 5, 6, and 7 of the Z7 byte contain the “101” pattern,
and bit 8 of the V5 byte contain “1”, in five consecutive VT superframes.