Page 29
C Copyright 2005 Exel Orbital
All Rights Reserved
1.
2.
3.
4.
5.
6.
Alarms and Faults
The above message will appear if cur-
rent fails to flow through the electrode
after an attempted arc start.
The above message will appear if cur-
rent deviates outside the alarm set
value, see Alarm Settings.
The above message will appear if volt-
age goes below the alarm set value, see
Alarm Settings.
The above message will appear if volt-
age goes above the alarm set value, see
Alarm Settings.
The above message will appear if speed
deviates outside the alarm set value, see
Alarm Settings.
The above message will appear to alert
the operator must change the electrode,
see creating a weld schedule.
