EVS XSnano, Руководство по настройке

Страница: 164 / 198

Default copy/move
Description Specifies whether the copy operations should be executed
preferably using the the Gigabit network.
Values The value is forced to Gigabit for this parameter on an XSnano
server.
• Gigabit:
The copy operations are executed via the GigE interface.
Freeze on cue points
Description Specifies whether Multicam will freeze or not when it reaches
a cue point marked on the record train that is being played
back.
The post-roll parameter is not taken into account for this
functionality.
Values Yes / No
When playing record trains where cue points have been
marked, the playout freezes on the cue point if the parameter
is set to “Yes”. It plays through if the parameter is set to “No”.
Default value No
Codec target
Description Specifies which essence(s) of the clip will be used in case of
clip copies to a distant server.
Values Two values are possible for this parameter:
• Intra : Only the Intra essence of the clip is copied.
• Intra + LongGOP : Both Intra and LongGOP essences of
the clip are copied.
Default value Intra + LongGOP
Protocol Receive page
Description Specifies on which page the clips created by protocols are
stored. When a page is full, clips are stored on the next page.
Only clips created on this page (and the other protocol pages if
the first page is full) are visible for protocols.
Values 1 to 10 (=0)
Default value 6
154 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014