EVS XSnano, Руководство по настройке

Страница: 139 / 198

J3 player (Char OUT + Format)
Description Allows modifying the behavior of the J3 connector on V3X
codec modules used as player channels.
One of the following behaviors is possible:
• Clean (downconverted) output (initial behavior)
• Monitoring output (same behavior as J4)
Values The following values are available for the Char OUT setting:
• No: J3 is used with its initial behavior
• Yes: J3 is used as a monitoring output (same as J4)
With V3X boards, the value is forced if a single behavior is
possible.
With COHX boards, the value is forced to
No and J3 keeps its
initial behavior.
The values for the
Format setting is read-only and corresponds
to the actual output format.
Default value No
J3 recorder (Char OUT + Format)
Description Allows modifying the behavior of the J3 connector on V3X
codec modules used as recorder channels.
One of the following behaviors is possible:
• Loop of input (initial behavior)
• Monitoring output (same behavior as J4)
Values The following values are available for the Char OUT setting:
• No: J3 is used with its initial behavior
• Yes: J3 is used as a monitoring output (same as J4)
With V3X boards, the value is forced if a single behavior is
possible.
With COHX boards, the value is forced to
No and J3 keeps its
initial behavior.
The values for the
Format setting is read-only and corresponds
to the actual output format.
Default value No
Char OUT J4
Description Specifies the monitoring output format generated on the J4
connector.
Values • SD
• HD
Default value System dependent
CONFIGURATION MANUAL XSnano Server 12.02
3. Multicam Configuration 129