EVS Multicam LSM, Руководство по эксплуатации

Страница: 53 / 242

Ranking (***)
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
The Ranking function allows assigning a ranking to the current clip. Pressing several
times this key will scroll through the different values: 0 (***, not highlighted).
Depending on the mode selected with the D key (CLIP/CAM), this ranking is assigned
only to the camera angles of the clip loaded on the controlled channels (CAM mode), or to
all camera angles of the clip (CLIP mode).
If the Keyword info parameter of the Operational Setup menu (p.1.1 F2) is set to “Yes”, the
ranking will appear on the OSD of the output monitors when cueing up the clip.
Sort->TC
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
The Sort->TC function allows the operator to search the database for all clips or trains
containing a specific timecode. Press
SHIFT+C again in Set TC mode to call it.
When calling this function, the timecode of the current picture is used as a default
selection. The operator can immediately perform the search or he can edit that timecode
before starting the search.
See section "Searching for Clips by Timecode" on page 69 for more information on how to
search for clips by timecode.
Set TC
The Set TC function is only available in SHIFT+B on the Sort->TC menu. It allows the
operator to restripe the timecode of a clip. "Restriping Clips" on page 67.
Depending on the mode selected with the D key (CLIP/CAM), the new timecode value is
assigned only to the camera angle of the clip loaded on the primary channel (CAM mode),
or to all camera angles of the clip (CLIP mode).
Name
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
The Name function is only available if a keyword file is selected in the Setup menu. It is
used to name a clip based on available keywords. "Keyword Management" on page 156
for more details. When the Name function is selected, pressing
SHIFT+C again will call
the Search function.
Search
The Search function is “hidden” behind the Name function. Press SHIFT+C again in
Name mode to call it. It allows the operator to search the database for clips based on
keywords and ranking. "Keyword Management" on page 156 for more details.
OPERATION MANUAL Multicam LSM 12.05
4. Clip Management 41